Audi A6 E-tron due in early 2024
Range Rover Gives the 2024 Velar
New Panamera and Taycan to lead Porsche's EV future
MB Quart NT2C-116B specifications.
Car speakers Specs << MB Quart << MB Quart NT2C-116B| Specification | | | Reviews |
General characteristics MB Quart NT2C-116B
Diameter:
6.5 Inch
Sensitivity:
87.7 dB
Impedance:
4 Ohm
Frequency Response:
35-21000 Hz
Peak Power Handling (Watts):
120 Watts
Color:
Black
RMS Power Handling:
60 Watts
Marine Grade Protection / IPX Rating:
Life Shield: Protected for Water and Dirt. Uv Protected Against Sun Fade.
Tweeter Dome Material:
1 Inch Pure Titanium Compression Diaphram : Very Smooth Musical Response, With Very High Output With Minimal Required Amplifier Power
COMPRESSION HORN:
Coincident Mounted Compression Horn
Overall Volume:
is Improved as Much as 5db Over Conventional Speakers, Wavelength Transparent Acoustic Lens Improves Midrange Frequencies Through the Cone
Surround:
Natural Butyl Rubber
Remains:
Musical in All Weather. Does Not Stiffen in Cold.
Cone:
8 Inch Composite Poly Cone
Water Resistant:
Composite Polypropylene Cone With Temperature Stable Butyl Rubber Surround Mounted on a Lightweight Composite Frame
VOICE COIL FORMER:
High Temperature Voice Coil and Former
Voice Coil:
is High Temperature Copper, Wound on a Kapton Former Which Allows the Voice Coil to Handle More Power While Remaining Light in Weight.
Spider:
Water Resistant Spider
Woven Fiber:
Composite Spider to Stabilize the Cone and Voice Coil in All Musical Situations.
Cooling System:
Front and Rear Venting
Air Passes:
Through the Spider and Back Plate to Exchange Air Over the Voice Coil.
Crossover Type:
12db Butterworth
Smooth Transition:
From High to Lower Frequencies Remain Musicial and Not Harsh or Distorted
Frame:
composite Abs and Glass Fiber Frame
Composites:
Add Strenth to the Frame Without Adding Distortions or Harmonics That Can Affect the Tonal Quality of the Speaker
Motor:
High Energy Y30 Motor Assembly
High Energy Strontium:
Ferrite Magnet for Higher Output With Minimal Amplifier Power
Grills:
Composite
UV:
Treated Against Sun Fade and Waterproof
Marine Certified:
Yes
IPX67:
Yes
Tweeter Material:
Titanium Dome Tweeter
Marine Certified:
Marine Certified Crossover
Illumination:
Yes
Enclosure:
Injection Molded Enclosure
Heavy Duty:
Abs Cast Enclosure Provides Strength and Improved Bass Response With Increased Volume While Remaining Very Light Weight
Mounting SYSTEM:
Steel Reinforced
The Mounting System:
Between the Pipe Mount and the Tower Enclosure Has an Internal Steel Mounting Plate for Additional Strength
Centering Ring Allows:
Yes
Centering Ring Allows:
the Speakers to Tip Left/right When Mounted to an Arced Mount
Mounting Hardware:
Powder Coated Die Cast Mounts
Mounting Hardware OPTIONS:
Flexible Mounting
Eleven Mounting Hardware Options:
From 1.5" to 2.75” Included
Certifications:
Ipx67, Conformal Coated, Uva Certified, Cea426b
Rms Power Handling:
60 Watts
Peak Power Handling (Watts):
120 Watts
Impedance:
4 Ohm
Frequency Response:
35hz-21khz
Frequency Response:
55hz - 20khz
Sensitivity (1 Watt/1 Meter):
87.7 Db
Tower Length:
8" (203.2mm)
Hang Height:
7" (177.8mm)
Height:
6.75" (171.4mm)
Width:
6.75" (171.4mm)
Certifications:
Ipx67, Uva Certified, Cea426b
Product Dimensions:
12 X 10.25 X 15.69 in (30 X 26 X 39.6 Cm)
Product Weight:
7.5 Lbs (3.4 Kg)
Weight:
10
Popular today
Frequency Response: 50-20000 Hz; Peak Power Handling (Watts): 120 Watts; Color: Black; Frequency Response: 50Hz-20kHz; Maximum SPL: 100dB; Total amplifier power: 120W x 2; Driver complement: 4 x 4” ...
Diameter: 8 Inch; Sensitivity: 92 dB; Impedance: 4 Ohm; Frequency Response: 25-22000 Hz; Peak Power Handling (Watts): 140 Watts; Color: Black; RMS Power Handling: 70 Watts; Marine Grade Protection / I...