MB Quart NHT1C-116B specifications.

  Car speakers Specs << MB Quart << MB Quart NHT1C-116B

Specification | Reviews
MB Quart NHT1C-116B



General characteristics MB Quart NHT1C-116B
Diameter:
6.5 Inch
Sensitivity:
92 dB
Impedance:
4 Ohm
Frequency Response:
30-24000 Hz
Peak Power Handling (Watts):
150 Watts
Color:
Black
RMS Power Handling:
75 Watts
Marine Grade Protection / IPX Rating:
LIFE SHIELD Protected for water and dirt. UV protected against sun fade.
Tweeter Dome Material:
1 Inch Pure Titanium Compression Diaphram  Very smooth musical response, with very high output with minimal required amplifier power
COMPRESSION HORN:
Coincident Mounted Compression Horn  Overall volume is improved as much as 5dB over conventional speakers, Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone
Surround:
Natural Butyl Rubber  Remains musical in all weather. Does not stiffen in cold.
Cone:
6.5 inch Composite Poly Cone  Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
VOICE COIL FORMER:
High Temperature Voice Coil and Former  Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.
Spider:
Water resistant spider  Woven fiber composite spider to stabilize the cone and voice coil in all musical situations.
Cooling System:
Front and Rear Venting  Air passes through the spider and back plate to exchange air over the voice coil.
Crossover Type:
12dB Butterworth  Smooth transition from high to lower frequencies remain musicial and not harsh or distorted
Frame:
Composite ABS and glass fiber frame  Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker
Motor:
High Energy Y30 Motor assembly  High energy strontium ferrite magnet for higher output with minimal amplifier power
Grills:
Composite  UV treated against sun fade and waterproof
Marine Certified:
YES  Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand.
IPX67:
YES  Tested to the highest Marine and Motorsports standards for resisting the elements
Tweeter Material:
Titanium Dome Tweeter  Very smooth musical response, high output with minimal required amplifier power
Marine Certified:
Marine Certified Crossover  Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
Enclosure:
Injection Molded Enclosure  Heavy duty ABS cast enclosure provides strength and improved bass response with increased volume while remaining very light weight
Mounting SYSTEM:
Steel Reinforced  The mounting system between the pipe mount and the tower enclosure has an internal steel mounting plate for additional strength
Centering Ring Allows:
YES  Centering ring allows the speakers to tip left/right when mounted to an arced mount
Mounting Hardware:
Powder coated Die Cast Mounts  Mounting hardware are Die Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust
Mounting Hardware OPTIONS:
Flexible Mounting  Eleven mounting hardware options from 1.5" to 2.75” included
Weight:
10


Popular today


Power Acoustik MW-10WT
Power Acoustik MW-10WT
Diameter: 10 Inch; Sensitivity: 91 dB; Frequency Response: 30-40000 Hz; Peak Power Handling (Watts): 600 Watts; Color: White/Titanium; RMS Power Handling: 300 Watts; Peak: 600 watts; RMS: 300 watts; D...
Pyle PLUTVA104BT
Pyle PLUTVA104BT
Diameter: 4 Inch; Sensitivity: 95 dB; Impedance: 4 Ohm; Frequency Response: 100-20000 Hz; Peak Power Handling (Watts): 200 Watts; Color: Black; RMS Power Handling: 100 Watts; Frequency Response: 100-2...