Kicker Q-Class 42IQ10001-2 specifications.
Car amplifiers Specs << Kicker << Kicker Q-Class 42IQ10001-2
General characteristics Kicker Q-Class 42IQ10001-2
Maximum Power:
2000 Watts
Low Frequency Response:
40-180 Hz
Number of Channels:
1
Frequency Response:
25-180 Hz
RMS Power Output:
500x1 Watts
Amplifier Class:
D
Fuse Rating:
100 A
RMS Power [Watts]
@ 14.4V, 4Ω mono, ≤ 1% THD N:
500 x 1
@ 14.4V, 2Ω mono, ≤ 1% THD N:
1000 x 1
Length [in, cm]:
9-7/16, 24
Height [in, cm]:
2-1/16, 5.2
Width [in, cm]:
7-9/16, 19.1
Frequency Response [Hz]:
25 - 180
Signal-to-Noise Ratio [dB]:
25 - 180
Input Sensitivity:
Low Level: 125mV-5V
High Level:
250mV-10V
Selectable Electronic Crossover:
Variable LP 40-180Hz, 24dB/octave
KickEQ™ Bass Boost (end panel adjustable):
Variable 0–18dB @ 40Hz
"KickEQ ™ Parametric Bass Boost(Remote Control Adjustable)"
Boost:
Variable 0-18db
Adjustable Center Frequency:
24Hz-80Hz
Bandwidth:
.5-10
Subsonic Filter:
25Hz, 24dB/octave
REMOTE BASS:
yes
Selectable Active Crossover
Variable High Pass 10-100Hz, Variable Low Pass:
40-200Hz
Ajustable Butterworth slope:
OFF, 6, 12, 18 or 24dB/Octave
Adjustable Linkwitz-Riley slope:
OFF, 6 or 12dB/Octave
KickEQ™:
Graphic 31 Band, 1/3 octave, or - 12dB
Time Delay
Adjustable Delay:
0-20ms
Adjustable increments:
.02ms, .1 ms and 1.0 ms
Compressor
Adjustable Attack and Release time; Adjustable 1:
1 - 10:1 ratio
Input Mixer:
Maps signal inputs to specified speaker outputs
CEA Power:
500 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)
CEA Signal-to-Noise:
Ratio-80dB CEA-2006B (ref: 1W, A-weighted)
Weight:
7
Popular today